Electronics Inverter repair

An inverter is a useful thing. It takes a stack of electrons from a 12 volt battery, and makes them look like the stuff that comes out of your wall, in my case at 240 volts.

How it does it is anyones guess.

In my case it doesnt actually do that. In fact all it does, is take a stack of electrons from a 12 volt battery, and turn them into the smell of melting value.

I couldnt understand why a perfectly interesting looking device should fail.

Here it is pictured after it was repaired, but it also looked pretty much like that when it didnt work, but now Ive given away the ending to this tale.

I fixed something - a first.

Note the total absence of left over bits - also a first.


Normally, the plan of attack is to open the device up, then put all the left over bits in the bin next to the now slightly more hollow, and slightly lighter device.

But this time was different.

To begin with I already knew why it was making all that melting plastic smell.

It was over heating.

The thing has a fan that is presumably meant to spin around a lot. At least I hope its meant to spin around a lot. If it isnt meant to, it does now.

Perhaps I just invented something....

To make an artificial breeze, simply take a normal fan, and make it spin.

So...

The point is the fan wasnt spinning. I have a few fans that Ive pulled out of junked computers, so I figured Id just replace it. I can solder a bit now as well, so I figured it should be easy.

There were even some obvious screws to undo.

I used the electric screwdriver my mum bought me as part of a present.

Thanks mums everywhere. It even has a torch built in and you can never own enough torches, even when you will never use them.

I always thought electric screwdrivers were a bit pointless, but it turns out they are excellent. Ive just never actually needed one before.

Unlike this project, my last had a few bits left over, and this was where the electric driver was really useful. It turns out there are a zillion screws inside stuff.

Pictured is all the leftover bits not including all the gears and shafts and all kinds of springs and stuff that might come in handy one day.

"What are the chances of any of it coming in handy?", I hear you ask.



But thats what they said about the 200 short lengths of black poly irrigation pipe I still have in the shed.

This thing used to be one of those fax, copier, printer combo devices that wasnt working any more. A friend was throwing it away, and thought my car was as good a place as any to throw it. It turns out there are some good motors and gears inside. I think there were five motors in there. Thats them on the right. Maybe six motors. Im planning on needing some motors, gears, and some shafts for making my solar tracking heliostat. There are also a stack of salvaged components used for tracking the placement of motors. The motor on the bottom right has a spoked arrangement that passes between a censor that detects light, and a light. The shadows cast by the spokes allow the system to track where the print head is. Or so Ive read.

So much to learn. So much time. If you just stop watching TV.

Anyway, Ive drifted off what pretends to be this posts topic...

Ok, so the fan wasnt spinning.

None of the fans I had would fit exactly, and would have to be trimmed (hacked and snapped with a pair of pliers) until they could be coaxed into duty.

I looked under that foil label and found the exposed end of the shaft.

I thought Id drop in some oil before I replaced the fan to see if thats all it needed. It was.




The black, and off white cylinder in the front with the brown stain at the base is a capacitor.

Im guessing it was also the source of the burnt plastic smell.

So that had to go. Luckily I have stacks of different capacitors from pulling apart some stuff, and had a duplicate.

A big component with large nicely spaced pins that proved easy to solder.

The thing went back together with no left over bits, and no spilt coffee added.

I realise this was a very simple repair, but it is something I would have sent to landfill before learning a bit of electronics over these last few months.

Here is a terrible photo of it charging a phone through its transformer, and maybe a bit of Bigfoots leg. Who can tell.



A 12v car battery supplying an inverter outputting 240v, then through the iPhone transformer to bring it back down to 5v.

Ok its slightly inefficient, but the phone was the smallest thing I could take to the car to test it.

I rate this a total success.

Which is nice.




120 Things in 20 years - Bringing me one step closer each day to being able to take down a Terminator. Or repair an inverter. I need to win a 3D printer.

Read More..

Thinking Starbuck

Im going to try to work the word "**systemically" into more conversations from now on.

Sometimes I marvel at the total awesomeness of the net. As long as I have a net connection, I effectively know everything you humans have ever worked out.

Unless there is a coffee house or a 1978 sifi* TV series, or worse yet, a naughties remake of said 70s TV series with the same name.

Then Im doomed.

I wanted to know about someone called "Starbuck", and more specifically, I waned to find out what all the fuss was about, and why everyone called everything "Starbuck(s)".

Sometimes its simply too hard and you have to wade through too much crud.

What I need is either a thing that just adds a few different suffixes to everything, or a special "I want the thing thats probably unpopular" function on google. The suffixes would probably include things like "General", "Sir" or ... well thats all I can think of really.

Just "General", and "Sir".

Perhaps I could just try those two search suffixes on my own without having to change the rest of the world.

I guess it could work.



*120 Things in 20 years - Did you know that if you do a search for sifi, you get a link to "systemically** important financial institution" but scifi gets you something that makes sense? Im guessing its actually substantially easier than I report to find the right stuff when thinking about people named "Starbuck" when you can spell.

Read More..

Aquaponics Roots in the media

Its quite possible that this is one of those things that everyone does, but its so obvious that nobody mentions it.

Perhaps everything is one of those things, but Id rather hear something twice than never know about it, so Ill say it anyway.

For some time, Ive been harvesting things like lettuce, then spending valuable seconds of my life getting the media out of the roots and retuning it to the grow beds. Clay balls get loose a bit more readily than scoria, but roots seem determined to hang onto whatever media they find themselves in.

Dont get me wrong, this is no way an issue because it really is only a few seconds, but Id rather spend those few irreplaceable seconds doing more important things - eating strawberries, looking at fish, that sort of thing.

But I discovered that if you just snap off the roots and leave them in a bucket, the media falls out all by itself.

Bam! Earth shattering tip right there.

I add an extra step for the worms.

When I pull up a lettuce, the root ball always has a few worms in it. Even in the constant flood grow bed there are worms everywhere. And as much as Im happy to feed my worms to the fish, I like my worms and like it when they live in my growbed rather than die on the ground. So when I snap off the roots, I lay the ball of roots, and media back on the growbed until the next time I wander past. This allows the worms time to get back into the growbed as their root ball home slowly dries.

The next day (or whenever) I drop the root ball into my root ball bucket, where it dries out and leaves the media behind. After the bucket has seen a few root balls added, or when I get around to it, I return the loose media back to the grow bed, and the dried roots and stems to the compost heap. Once in the compost heap, they sit for eternity. We dont use the stuff.



120 Things in 20 years - Wasting compost from the roots caught up in my aquaponics media.

Read More..