Competition winner!

So according to Mrs 120 things in 20 years (also known as Mrs Bullwinkle, and also by her actual name in non-digital real life, the winner of the amazing solar charge controller competition - based (apparently) entirely on effort rather than anything else is ....

brbrbrbrbrbrbrbrbrbrbrbrb boom tish!

Mike Creuzer who suggested I hold a comp to get new ideas to learn or something.

To be honest I lost track a little :)

I dont really like prescription opiates, or competitions, and it turns out I hate hosting them.

Some ideas Ive had are better than others. 

But I do like winning them, so if Mike is anything like me, he will like the fact that Mrs Bullwinkle thought his thoughtful thoughts were...

Winsome!

So congratulations Mike you seem to be the winner. I hope you put it to good use, or perhaps even better, I hope you hold a similar competition on your own blog and pass it on to someone else :) (not really - use it).

Please keep in mind I was conned when I bought it as it doesnt do the claimed 24v solar to 12v battery, so there is a slim to fare chance that its filled with nothing but exported industrial waste rather than MPPT circuitry. 

Winner beware!

Pass the final test - guess my email address and send me your postal address and Ill send you your awesome prize. 

Why did Mrs 120 Things In 20 Years have to pick the post distant entry from the other side of the world instead of the guy I would have picked in my home town with the "most unfinished projects" entry, or my friend that suggested the cheese eating comp? I could have just handed it to either of them.

At least it will finally find a good home.



120 Things In 20 Years Congratulates its most recent prize winner. Most of the rest of you are insane!

















Read More..

Photography Rock melon time lapse

 thought I might do a time lapse of a rock melon developing.

Im not sure why, but I like rock melon a lot.

The might be called cantaloupe in your part of the world.

Either way, I have some growing.

The shot looks a bit like this.

 The white splodge at the bottom is the time lapse camera.

Its facing toward the extremity of the rock melon vine centre top.

The plan is to capture a rock melon forming from scratch.

Apparently I have around a month. With that time in mind, Ive set the camera to take a frame every so often.

I really dont know how often, but having set it up, Im loathe to change anything because it would mean the loss of all the pics to date.

Thats the big problem with this camera. You dont really know when its working or not. It even pretends to be working when there is no memory card installed. That means it seems to be working, and it only takes a month before you realise the thing doesnt have a card in place.

One month to take a picture of nothing.

Oh well. It hasnt happened so far, so I guess it isnt really a problem.

This is the topic up close.

Currently its a hand fertilized flower in the last stages of its flowery existence.

Hopefully, over the next few weeks, we will see a rock melon grow to harvest.

If not, there is a strawberry runner incoming from stage left that might make for a decent set of time lapse images.



Or not.

Who knows?

A month or so from now, all will be revealed.



120 Things in 20 years - Bringing you time lapse images of rock melons. Thats it really. Time lapse images of rock melons.



Read More..

Water is flowing in the IBC system Cycling and Phoshate


Close to completion. The outdoor IBC system is flowing water. Take a look at my settling tank. Its based on a wet dry filter. The cool part is if it gets clogged it will not jam up the system.

Ive begun to fill the beds with plants, but have no fish.  Im cycling the system, but right now I want root growth.  So I embarked on a study of Phosphate.  

Here are two articles I believe are quite good although somewhat over whelming.
  • Phosphate and the Reef Aquarium
  • Aquarium Chemistry: Phosphate and Math
Read More..

Commercial Aquaponics

As I continue to learn and develop my farming skills  I keep finding these videos and articles relative to commercial aquaponics and it makes me feel that I should take this hobby to the next level.  When I watch these videos I think this is what I could be doing. So while I could simply list them in the Information page,I would prefer to create this ongoing post. Dream big!

Intensive Aquaponics with Liquid Oxygen

Heather Oaks Aquaponics

Murray Halum Aquaponics for Profit

Intro to 321 Aquaponics






Read More..

Timed Flood and Drain

My pursuit of an energy efficient system continues.   Yesterday after about 6 months of flawless operation my bell siphon failed to drain.   This inspired me to find something simpler, less expensive and more dependable.  I remembered this conversation on AquacultureHub

By simply providing small drain holes at the bottom of the media bed a Hybrid Flood & Drain / Ebb & Flow can be created.   I have long been a proponent of Ebb & Flow due to the energy savings.

Heres how it works:
Its pretty simple.  Theres a stand pipe that keeps the water from exceeding a set level about 1-1/2" below the gravel, and a weep hole (about 5/16") that drains the water out.  The pump comes on just a few times per day.  While the pump is filling the grow bed the water seeps out.  But the pump fills the tank much faster than the water leaves, so it fills.  The timer need only be set on long enough for the grow bed to fill.
In the Summer you may need to run the pump more often, but I run mine 3 times per day all year long.  The gravel stays moist and the water is aerated sufficiently for the fish.
By running the pump only a few times per day you save utility costs, and there is no siphon to fail.  I inserted a capped 1" pipe at the bottom of one of my grow beds and drilled my weep hole in it so that I could see it and this makes cleaning the hole very easy.  I can remove the cap to get inside if need be.  Ive been running my timed flood and drain for several months and the hole has not clogged, but it does not hurt to inspect it once in a while. 
The timer I use is just a cheap $3.00 indoor timer with a plastic food storage container over it.  I poked a couple holes through the plastic, and plugged the timer in.  It stays nice and dry this way, and  easily accessed by removing the cover of the container.


Here are the conversations between John Burgess, aka RupertofOZ,   Glenn Martinez,  and J. Linden Rose.


System Design Considerations

Comment by J. Linden Rose on August 31, 2012 .
   Many people use gallon of fish tank to gallon of grow bed ratios. This has a minor flaw, because nutrient uptake and removal by plants is directly related solar surface area, and only indirectly related to grow bed volume assuming root development plays a large role in your particular crop. But before you can say something like 3 sq. ft. of grow bed per gallon of fish tank, you need to think about stocking density and feed conversion ratio (FCR).
   In this industry everyone is taught to sell their tilapia when they are no more than a year old. The reasoning is that when fish are small and young, the FCR is smaller, and less feed becomes more fish faster.  Thats useful thinking in the aquaculture world, but lacks a certain breadth of consideration in the AP world. You might consider an aquaculture strategy that focuses on growing larger, older fish.  Remember that AP systems produce about $4 of produce for every $1 of fish in a Rakocy style system which has been optimized around fish production.  By lengthening the grow-out period for your fish, the FCR will increase, but it will also stabilize allowing you to have better control over the nutrient stream to the much more important produce side. Additionally, higher FCR means more nutrients end up in the plants than in the fish... which is where the money is. This in turn should imply that larger fish lead to larger grow beds.
   With that in mind, its probably a good idea to see your system as one that will go thru many changes when it is new. Then as your fish mature, and your nutrient stream stabilizes, you will be able to fine tune the grow bed surface area to match.
   Gravel beds, a type of fluidized bed reactor, are the oldest and most established form of modern aquaponics, and were first used in the work of Woods Hole researcher John Todd at his New Alchemy Institute, and Dr. Mark McMurtry at NC State.
   Dr. Jim Rakocy, a RAS (Recirculating Aquaculture Systems) aquaculture specialist at the University of the Virgin Islands in St. Croix, abandoned gravel beds because he wanted to work around the issue of sludge build-up. To avoid sludge issues, he developed raft culture, which in the absence of a bed reactor, required settling and degassing tanks. This system falls short of optimal for several reasons: 1) youre spending money on nutrients your plants need that you then remove from the system wasting resources 2) his floating rafts blocks most of the air-water interface for gas exchange intensifying the need to waste electrify on compensatory aeration, and 3) this system design is fish-centric, obsessed with how many fish you can cram into a barrel, when Jims own publications showed that the aquaculture side was a minor contributor to revenues, and 4) only a very limited number of plants can tolerate having their roots immersed in water 24/7.  Typically plants with low nutrient requirements and low ability to scrub nutrients from the water.
   Tom Speraneo, is credited with the first use of tilapia in AP systems, but also is credited with cycling the water level in the gravel beds, creating enormous amounts of temporary thin water surfaces for gas exchange, and facilitating aerobic RAS waste processing. But the other interesting development was that it made the beds capable of sustaining active vermiculture, which further breaks down and decomposes the solid wastes, and restores lost nutrients instead of wastefully removing them.  This seems to have been confirmed by the systems popularized in Australia by Joel Malcolm and Murray Hullam, with Murray claiming to have systems that have run without any waste removal being necessary for over 3 years.  Similar results have occurred in Hawaii with Glenn Martinezs system.
   Using the archaic meaning of vermiculated of "worm eaten", we can call these vermiculated fluidized bed reactors, and their use should free up a great deal more nutrient from the same amount of feed input, allowing you to focus on the much more profitable produce production side of an AP system.
   With that in mind, Wilson Lennard has shown that raft cultures seem to be slightly more productive with low nutrient crops like lettuce, whereas most crops cannot be grown in rafts at all.  Since lettuce has a very fast seed to crop cycle, it can provide stead cash flow while waiting for more valuable crops to mature in the gravel beds, and with all the extra nutrients available, theres plenty of reason to have both in your system design.  This will also increase the total system volume, which is good for fish, and if you design your deep water wells with tops that are not floating on the water, youll have greatly enhanced gas exchange surfaces.
   It would probably be a good idea to avoid NFT (Nutrient Film Technique) completely if your system includes fish production, because a thin layer of water spread out over long distances is basically a heat exchanger, which will cause diurnal temperature swings in your fish tank greatly adding to their stress levels.
Comment by Glenn Martinez on September 1, 2012
   First, most of us have fallen into a trap of running our aquaponic (AP) systems 24 hours a day. Think again....perhaps it should be shut down at night, drain the bio-filter (cinder beds) and let the system rest at night. Keep pumping the AIR to the fish, but stop running the water thru the vii-filter and float beds. This saves energy. It also allows the fish water to build up ammonia that will then be sent the bio-filter beds. Very quickly the bio-filter will convert the ammonia to nitrates.
   As long as you do not let the ammonia build up in the fish tank, you are okay. It is recommended drain the bio-filter bed when it is not circulating, as leaving water stilling in the bio-filter, seems to deplete the oxygen (everything is composting) and kills the worms and oxygen loving bacteria....
   The worms in our AP systems (cinder beds) eat the fish solids, breaking them down. Most important to keep in mind that our siphon system is NOT inside the bio-filter, but removed and located in an container that will drain the vii-filter "drip dry" at each flush. All of our bio-filter beds are "double tray" or false bottom, to allow drip dry draining. The drained bio-filter bed will NOT dry out over night and the plants do not suffer.
   To drain the bio-filter beds at night, place a small hole in the stand pipe of the bell siphon or install a small drain tube to drain the bio-filter bed when the water stops coming in for any reason , like a power failure.
For balanced nutrition, add vermicast or compost tea. That will supply all the micro and macro nutrients you need to grow NUTRITIOUS food, kala etc.
Food for thought.
Glenn, Olomana Gardens, Hawaii
Comment by John Burgess on October 17, 2012

   "To drain the bio-filter beds at night, place a small hole in the stand pipe of the bell siphon or install a small drain tube to drain the bio-filter bed when the water stops coming in for any reason , like a power failure."
Just run a standard overflow standpipe... and timer... flood & drain configuration... ditch the siphons altogether...
   Part of such a configuration... is the (generally) two small (6mm) holes at the base of the standpipe.. to allow the grow bed to "drain" during the timer off period...
   And utilising a timer based F&D... means its simple as... to turn the beds off or limit/extend the F&D cycles.. during the night... or as a response to climatic variables...
Read More..

Aquaponics Artificial pollination

Ive been artificially pollinating my cucumber plants for a while now.

I do the hand pollination thing with a small artist paintbrush, because my original - whatever you call cotton on a stick in your part of the world (cotton buds, cotton swabs, etc)- fell to bits, and was really only a stick by the end.

But Ive been wondering if picking a handful of male flowers, and dropping into a blender of water, might just give me a pollen shake to spray into the female flowers. Obviously it would depend on the survivability of pollen in a blender. Its just an idea, and although a quick search didnt find it, it may well have been tried.

It might be a really quick and easy method to pollinate things that dont do the thing with the bees for whatever reason.

I suspect the reason my cucumbers are not getting pollinated, is because there dont seem to be any bees. I seem to remember something about bees mysteriously dying out or something.

I have no idea if it will work, but given none of my cucumbers set fruit without my intervention, it should be easy enough to test. I think all Ill need to do is separate two of my four cucumber plants, and spray one with the pollen shake, and leave the other untouched. The two remaining plants Ill keep pollinating by hand because I need the cucumbers.

This experiment will have to wait for a while, because Ive hand pollinated all the flowers this week. Ill separate the two test plants, and wait until they stop producing fruit before I start the test. Ill use the delay to see if anyone else is doing it, or if it wont work for some reason.



120 Things in 20 years - Its 6am and I havent slept yet.




Read More..

Hugelkultur

Water is becoming a scarce commodity.  Aquaponics is one way to grow with less water.
Here is a another brilliant alternative for dirt based farming.


Read More..